pad printing silicone rubber
Product Details:
| 918 | everycolor are avaiable |
|---|---|
| Place of Origin | Guangdong, China (Mainland) |
| Brand Name | HY silicone |
| Model Number | HY-9 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 200 Kilogram |
|---|---|
| Packaging Details: | 25kg,200kg/barrel |
| Payment Terms: | T/T |
| Supply Ability: | 8 Ton per Day |
Detailed Product Description
| RTV-2 Pad printing silicone rubber pad printing silicone rubberis specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: pad printing silicone rubber is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. Silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. pad printing silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicon pad is a carrier which pad printing the patterns on the steel plate onto the toy products' surface. How to use pad printing silicone rubber to make print pads 1. Firstly,clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent. 2. The normal proportion between the pad printing silicon and the silicone oil depends on the requirements of the customers. If pattern with big area to be printed, a soft silicon pad is needed and the amount of silicone oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not . The hardness of general pad printing silicone rubber is approximate of 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, the molecular weight of the silicon will be damaged by the silicone oil no matter how superior quality the silicon is, thereby bringing about abrasion intolerance, solvent intolerance and ageing. 3.General mixing proportion is as follows: add 30g silicone oil into 100g silicon with the hardness of the silicon pad being 20A°, which is suitable for the pad printing for alloy car and products with small patterns and contact areas. If a big pressure contact surface or a soft silicon pad is needed, the mixing proportion between the silicon and the silicone oil can be 100:30-100:50. But please note that the more amount of silicone oil added, the softer the silicon pad, which will reduce times of pad printing, abrasion resistance and solvent resistance. In addition, the times of pad printing will be correspondingly reduced which will cause increased cost and material waste. 4.The amount of the curing agent and the chemical reaction with the pad printing silicone rubber silicon is as follows: mix 100g silicon and 50g silicone oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicone oil, mixing for 2-3 minutes, and then deair to remove the air bubbles . The time of deairring generally does not exceed 10 minutes. If the deairing time is too long,it may cause fast curing of the silicon and impact the quality of silicon.
Whatever you have any further information required or suggestion, pls feel free to send also can call the number of 0086-755-89948006 and mobile 0086-13632531781(Ms.carol) or add my
Ms Carol Fang
|
pad printing silicone rubber
Send your message to this supplier
Other Products from this Supplier
See more
silicone, silicone rubber, pad printing silicone products from this supplier.
Didn't find what you're looking for? Post a buying lead.
Products
- RTV-2 Molding Silicon Rubber [141]
- RTV-2 Molding Silicone Rubber [739]
- Brushable silicon rubber [37]
- Pad Printing Silicone [187]
- Manual molding silicon [119]
- High Temperature Silicone Rubber [86]
- Liquid silicon for mold making [199]
- Silicon for shoe soles mold making [12]
- Silicon rubber for spin casting [10]
- Silicon rubber sheet [3]
- Silicon sealant [9]
- Silicone oil [19]
- Others [104]
Company Info
Shenzhen Hong Ye Jie Technology Co., Ltd.
[China (Mainland)]
[Verified Member]
City: Shenzhen
Province/State: Guangdong
Country/Region : China (Mainland)
Business Type:Manufacturer
Online Postings: Products