Detailed Product Description

Silicone  rubber for mold making applications

Silicone  rubber for molding making  is intended for making silicone rubber mould for resin craft, candles, plastic toys, relieve furniture, architectural decoration, funiture decorative, sculpture, and so on.

Silicone  rubber for mold making features

Silicon rubber for mold making is flowing liquid with general hardness of 22-50 A° after curing with features:

1. resistance to deformation and high-temperature, acid-alkali and expansion

2. good tensile strength, tear strength and elongation.

3. high reproduction times

Silicone  rubber for mold making operations

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed. Our curing agent is free charged.

(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demould.)
 

Any more information , please feel free to contact Tenny

Mobile: 0086-15013591182

Fax: 0086-755-89948030

Tel: 0086-755-89948019

www(at)szrl(dot)net