Detailed Product Description

Silicon rubber for electronic mould making applications

Silicon rubber for molding making is intended for making silicone rubber mould for resin craft, candles, plastic toys, relieve furniture, architectural decoration, funiture decorative, sculpture, and so on.

Silicon rubber for electronic mould making features

Silicon rubber for mold making is flowing liquid with general hardness of 22-50 A° after curing with features:

1. resistance to deformation and high-temperature, acid-alkali and expansion

2. good tensile strength, tear strength and elongation

3. high reproduction times

Silicon rubber for electronic mould making operations

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed. Our curing agent is free charged.

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

Any further information required ,please contact Ms. Jane.

Web:   www(dot)szrl(dot)net

Tel:      0086 755 89948019

Mobile: 0086 15813801674