Detailed Product Description

Silicon rubber HY-638 application:

Silicon RTV (HY-638 ) is two parts condensation liquid silicon rubber that can cure at normal temperature. It has excellent fluidity, tensile property and tear strength, moderate flame-retardancy and linear shrinkage. Mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc.

Silicon rubber(HY-638) features:

HY-638# silicon rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. silicone rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2%.

Silicon rubber(HY-638) datasheet :

      ModelAppearanceViscosity (cs)Hardness (Ao)Tensile Strength (kgf/c)Tear  Strength (kgf/)Elongation (%)Mixing ratio(%)Operating Time(H)Curing Time(H)  638White14000~1600025~28≥35≥25≥5002~30.52~4

silicone rubber (HY-638 RTV-2) instruction:

1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be      demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and

     can be demoulded after 2-3 hours.

3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can

     be demoulded after 1.5-2 hours.

4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can

     be demoulded after 1 -1.5 hours.

Frequently asked questions of moulding silicone rubber

Why does the silicone rubber mold have few molding times?

       The silicone rubber mold has few molding times is due to follwoing

reasons: adding too much silicone oil which will destroy the molecular of

silicone rubber; making the mold for small and fine detailed products with

higher hardness silicone rubber which is easy to break; making the mold for

large products with soft silicone rubber which will reduce the tensile and tear

strength of the mold, and the mold will have deformation. Thus, we should take

the proper silicone rubber to make the mold for suitable products.

The infomration just for reference,need more information about RTV silicone

rubber for mold making,PLS feel free to contact with Miss Lacey at the number

of 0086-755-89948019 and the mobile 0086-13691994072. Welcome to visit 

www(dot)szrl(dot)net anytime .